Clamcleat®CL236/S1 Roller Fairlead Mk1 Racing Junior with becket   Hard Anodised

Our engineering team have worked on this new project and decided to customise the CL236 by adding a becket.

The basic roller fairlead allows ropes to enter the cleat from above. The advantanges of the becket are:

- The becket holds the end of the rope under the cleat to allow rigging with a 2:1 advantage. It is easier to pull heavy load.

- The becket also holds shockcord and bungee under the cleat.

Available in two finishes: 
- CL236/S1 with becket has a silver stove enamel finish for a cost effective, high quality coating.
- CL236AN/S1 with becket has a hard anodised finish to give a harder wearing surface. 

Accessories for CL236/S1 

- The CL814 Keeper is added to prevent the rope getting caught in the teeth of the cleat. Keepers keep a rope in the cleat, or keep it out of the cleat.

- The Cage CL816 is an accessory that allows ropes to be cleated and uncleated at an angle of up to 70 degrees, rather than only in line with the cleat

- The Clamcleat® CL818 Tapered Pad aids correct rope/cleating alignment. It can allow tensioning without rubbing the rope over the cleat teeth.

Technical Details		Metric	Imperial
Rope Diameter		3 - 5mm	1/8 - 3/16"
Material		Aluminium & Nylon	Aluminium & Nylon
Hole Centres		66mm	2 5/8"
Length		82mm	3 1/4"
Width		18mm	11/16"
Height		25mm	1"
Bolt Size		M5	#10-24. 3/16"
Screw Size		4.8	No 10
Weight		39gms	1.4oz